1
RailPro Specific Help & Discussion / Re: Accessory Project for powering air solenoids
« Last post by G8B4Life on May 18, 2024, 10:18:30 PM »Wow, I didn’t screwup after all. I have 3 AM-1’s on the HC and I was trying to access the wrong one. The HC assigns duplicate turnout numbers???
In the manual it shows you to name them so I'm not sure why they are numbered.
Anyway, This is the scenario. I do not believe that the AM-1 program that controls turnouts allows for the turnout buttons to be maintained instead of momentary and does not allow a forever activation time. At least that's what I get from reading the manual. If that's the case your options are:
Lobby Ring to allow a forever activation time for solenoids that can handle being energised all the time, which I suggest you do, and
Create a program for use in the meantime, which is probably going to be a very long time, possibly forever.
Because one can't simply share accessory programs and only you know your layout and where the turnouts are you'll have to make your own in RailPro Assistant. The below example should get you started on what you want. I'd suggest grouping the turnouts into area's for naming the project, and naming the AM-1's the same. Remember, this way you will not find the AM-1 under Turnouts on the HC anymore but they'll appear under Accessories.
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
- Tim