RailPro > RailPro Software Updates
Heavy Steam ULT
DaneG:
Using trial and error, I was able to confirm that the Heavy Steam ULT does not work with the LM-2S.
nodcc4me:
Dane, was that because there is insufficient memory space in the LM-2s or is it electronically incompatible?
KPack:
I talked to Tim Ring and he said they have not written software for the LM-2S that can handle the Heavy Steam ULT. They may get it done, but he is also not sure if it will fit on the LM-2S. He has said that before with other software updates and ULT sounds, but they were able to get them all to work fine on the LM-2S. Back when they first released the major sound update with all the new features, it was originally designed only for the LM-3S (which was relatively new at the time). Most Railpro guys still had a ton of LM-2S's so I pressed him to try and get the code to work on the LM-2S. He did, and all the new features and ULT sounds work just fine on those modules.
My guess is that he will do the same for the Heavy Steam ULT and LM-2S. The file size for the ULT apparently isn't as large as other files. So it would just be a matter of updating the LM-2S from 2.09 to 2.30, which is quite a jump.
-Kevin
nodcc4me:
I hope Tim can make it work on a LM-2s. I have several. I wonder why he went from 2.09 to 2.30?
KPack:
Don't forget the LM-3S had another update previous to this...2.12 I believe. That was to enable the new Shay ULT to play properly. The LM-2S was never updated to that version, but in theory it should be capable of it since everything else so far has worked on the LM-2S once Ring has put the time in to write the software.
The jump from 2.12 to 2.30 tells me they did a ton of internal test revisions when they were trying to get the new programming to work. Seems like it must have been fairly complicated.
-Kevin
Navigation
[0] Message Index
[*] Previous page
Go to full version