RailPro > RailPro Specific Help & Discussion

Staging Yard Route Control

(1/1)

fianet:
I have a small staging yard (four yard lines) off my mainline with four switches.

I would like a single button control using an AM-1 for controlling switches for the selected the route (kind of like a macro).

Route A: SW1 straight, SW2 straight, SW3 straight, SW3 straight. Stays on main line
Route B: SW1 turn, SW2 turn, SW3 straight, SW3 straight. Turns off mainline and turns onto Yardline 1
Route C: SW1 turn, SW2 straight, SW3 turn, SW3 straight. Turns off mainline and turns onto Yardline 2
Route D: SW1 turn, SW2 straight, SW3 straight, SW3 turn. Turns off mainline and turns onto Yardline 3
Route E: SW1 turn, SW2 straight, SW3 straight, SW3 strait. Turns off mainline and turns onto Yardline 4

Can railpro do this/how?

G8B4Life:
It should be doable but you'd have to write a custom program for the AM-1 and it might depend on how you drive the points, you'd probably have to detect which way the points are set or the point machine would need to be able to somehow ignore being requested to be driven in the same direction it's already set for. Other than that I can't help much without experimenting myself which I don't have an AM-1 to do.

- Tim

fianet:
thanks for the feedback Tim.

Do you know where can I find information on writing a custom program for an AM-1?

Gordon Huber

William Brillinger:

--- Quote ---Do you know where can I find information on writing a custom program for an AM-1?
--- End quote ---

Page 39 of the RPA manual: http://ringengineering.com/RailPro/Documents/RailProAssistantUsersManual.pdf

fianet:
Thanks bill.

looks like i got some reading to do

Navigation

[0] Message Index