RailPro > RailPro Specific Help & Discussion
Sound file transfer issue
William Brillinger:
Are you running the latest version of the HC Sim software?
William Brillinger:
what steps are you taking to send the file to the LM?
I suggest removing any existing prime mover files from the LM before trying to copy a new one to it.
nodcc4me:
Joe, if you were able to load the 567ULT into the GP30 then it has to be on the HC unless you deleted it.
MtRR75:
--- Quote from: Josephbw on April 27, 2021, 02:09:22 PM ---I've managed to come up with a whole new problem now. I've been loading the 2.09 version program update to my LM2S modules. 3 of them worked fine, 3 of them got the "Verify Failed" error message and 1 got the "No Product Found message". On the last failure, I need to open up the engine and check connections.
I can't find anything related to Verification, any ideas?
Joe
I just fired up an HC and I didn't have any trouble with sounds or lights, so I don't think there is an issue with the engine.
I tried downloading the LM update again from Ring and got the same failure again.
--- End quote ---
I have run into some of the same problems that you are having. But first, know that I have only steam locos, and my problems related to trying to install the new ULT Heavy steam file.
I found that, once a loco had one of the messages that you got, the only thing that worked was to delete some of the files that were already on the LM. In my case, I had several whistles and bells on some of the locos -- trying them out until I decided which to keep. Removing these extra files fixed the problem.
Also, make sure that you have the LM the required distance from the HC-2 hand-held or the CI flash drive.
MtRR75:
--- Quote from: Josephbw on April 28, 2021, 11:54:53 AM ---I just wonder if some of my issues stem from the old computer I pressed into service for the downloads. It's one of our older ones that we upgraded from. It's a Lenova w/W8. It seems to work better if I repeat each task at least 4-5 times. :D
Joe
--- End quote ---
You should be fine. I am using a borrowed Windows 7 machine that has not been updated in a long time, and I have had not problems getting the files off the internet and into the HC-2 or the CI-1.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version