RailPro > RailPro Specific Help & Discussion
Sound file transfer issue
Josephbw:
Well I thought I had it figured out. I got 5 engines updated with the 567ULT file, and everything worked as it should. I just tried to do another engine using the same procedure that worked before and when trying to upgrade to the ULT file on this engine and another one I got the "Not enough memory" failure. I checked the engine and it only had the standard Ring files, then I checked the HC sim and it only had the same standard files plus the ULT file.
Any ideas?
Joe
G8B4Life:
Not enough memory is the error you get when there isn't enough free space on the LM for the file your trying to copy to it to fit. If the LM does only have the default files on it then the 567 Ult should fit. Unfortunately there isn't a way to actually see how much memory is being used / how much free space there is; you just have to start copying and hope!
Anyway, deleting some files from the LM that you know you won't use (like Diesel Engine, as your copying a new diesel sound) should fix the problem.
At least it looks like we solved the Could Not Verify problem.
- Tim
KPack:
The LM-2S will not have enough memory to fit two prime mover files. The LM-3S will. However, there's no reason to have anything on the module that you're not going to use. The first thing I do when I install a new LM module is to delete all the stock sound files. That way I know I'm starting with a clean slate and will have plenty of room for everything that I could want to add.
-Kevin
ON28:
Can an old sound file be retrieved? If I'd rather use an old prime mover rather than a ULT file, is there a way to reinstall the old one after it was deleted? Is there an archive of RP sounds somewhere?
nodcc4me:
The older files should all be in RPA. Both the ones from the server and the ones you have already downloaded.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version