General > General Discussion

DDA40X prime mover sound files

<< < (2/3) > >>

JRad:
Probably not an option in your scale, but a mini digital delay board and an amplifier board might be able to be connected to the LM and feed the second speaker with synchronized, but delayed sound.  I have a 1:20 scale GE 45 ton that would be nice with 2 speakers, but I've used all the room in one hood for the battery and LM.

GMM6809:

--- Quote from: G8B4Life on May 22, 2022, 03:46:50 AM ---It is there, the DDM45 listing on the website plays the EMD 645-20 sound file, which is correct for the DDM45, not for a DD40AX.

As for the light effect files, if all the ones you have in the HC say rev 2 then they should be the same as what RPA shows as available for download, Ring dropped the revision number off the light effect filenames a while ago, I think about when the LM-1 was made able to use the Rev 2 effects.

- Tim

--- End quote ---

Okay, I must be missing something, I did see it on their website, but it never loaded to play it, and I didn’t see if as an option to download from the assistant. I am confused.

And for the light effects, I’ll check..

Maybe I need to redo w load the assistant, it’s version:4.01.. :/

G8B4Life:
No, your not missing anything, The DDM45 sound sample doesn't load for me either. As I've mentioned before around here there is so much bad markup on that RailPro Sounds page I'm surprised any browser is able to render as much of the page as they do. However, the DDM45 sound file is the EMD645-20 which is downloadable in RPA.

- Tim

GMM6809:

--- Quote from: G8B4Life on May 22, 2022, 09:04:41 PM ---No, your not missing anything, The DDM45 sound sample doesn't load for me either. As I've mentioned before around here there is so much bad markup on that RailPro Sounds page I'm surprised any browser is able to render as much of the page as they do. However, the DDM45 sound file is the EMD645-20 which is downloadable in RPA.

- Tim

--- End quote ---

Tim,
Thanks for the information! i'll download the file as get is loaded. that makes me feel better.
I wonder why it's not labeled better, anymore...?

-Glenn

GMM6809:

--- Quote from: G8B4Life on May 22, 2022, 09:04:41 PM ---No, your not missing anything, The DDM45 sound sample doesn't load for me either. As I've mentioned before around here there is so much bad markup on that RailPro Sounds page I'm surprised any browser is able to render as much of the page as they do. However, the DDM45 sound file is the EMD645-20 which is downloadable in RPA.

- Tim

--- End quote ---

Hey Tim, no dice. It does sound like the correct prime mover, but it's only one engine that turns on. it also does not like or allow two prime mover buttons to function. only listens to the first button in order.

Any other ideas?

I'm going to call Ring tomorrow i think.

Navigation

[0] Message Index

[#] Next page

[*] Previous page