RailPro > RailPro Specific Help & Discussion

Removing Wires From the 9-Pin Connector

(1/2) > >>

andyg:
Hello,
I have a few G-scale engines running RailPro (which were converted by others), and I'm attempting to convert one on my own. The user manual for the LM-4S-G states that you can remove any unused wires from the 9-pin connector by "lifting the keeper on the connector." Can anyone shed light on how to do this? (If you can share pictures, that would be awesome!) The connector looks like one solid object so I can't figure out what part is the keeper and I don't want to break it by forcing something that shouldn't be forced. Thanks!

Andy G.

William Brillinger:
push these metal pins down and gently pull on the wire.

andyg:
Thank you! That's exactly what I needed to know.

JRad:
Interesting. I never considered doing this as I normally use most of the outputs plus the input. I just loop the unused wires and hold them with some heat shrink.

I assume that if you do this correctly, the wire can be re-inserted if you decide that it is needed in the future?

William Brillinger:
yes, you can re insert them.

Navigation

[0] Message Index

[#] Next page