RailPro > RailPro Specific Help & Discussion

New HC-3 and H3-C SUN announced January 20, 2024

<< < (2/4) > >>

nodcc4me:

I have recently had the welcomed opportunity to test the HC-3.

The width, height and depth are all slightly less than prior models. It also weighs almost 2 ounces less and is more comfortable to grip. The screen is also slightly narrower by about 1/16" but the height is the same.


The batteries are no longer active when the controller is off, which will stop it from discharging as opposed to the older models. Ring claims they will stay charged for up to 10 months. The charging port is the same. Ring cautions against using different chargers.


There is now twice as much storage memory. With all the available ULT sound files the extra storage ability is very useful.


The buttons are a nice feature. For now, the button options are Horn/Whistle, Bell, Stop All and Home. I don't know whether or not more will be made available. The Home button is particularly useful because it works from any page. For those of us who have gotten used to looking at the screen while pressing buttons, the Real buttons will come in handy as we get used to not having to look at the screen as much.


The built-in lanyard clip is also a welcome addition.

KPack:
Like Al I've been testing the HC-3 for the last few weeks.  Bottom line is that I love it.

The controller is smaller in all dimensions from the HC-2:


HC-3


Depth comparison:


Width comparison:


Height comparison:


The HC-3 is MUCH easier to hold than the HC-2.  Not only because it is smaller, but also because of the case itself.  The plastic used on the HC-3 is much more textured than before, and the edges have more of a hard angle rather than being super round (you can clearly see this in the last picture).  The plastic on the case also feels much more sturdy.

The screen is slightly smaller (correction... It is not smaller, they are the same size), and set back into the case further.  It feels better and is easier to manage with a thumb.  The model I tested was the HC-3-Sun and it is very bright.

The four physical buttons are easy to use without looking.  They can be customized between horn/direction/emergency stop/home.  At this time there are no other options to put on those, though that may be added later.  The two outer buttons turn the controller on.  When the controller is turned off, it fully turns off, unlike the HC-2 that went into a sleep state.  This is one reason why the batteries are able to last so much longer.

There is a single mini-USB port on the side for charging and file transfer.  When plugged into the computer it will not charge, but it also will not use any battery power.  So transferring files from the computer to the HC doesn't drain it.  Space is double the HC-2b, as has been noted.  Speed of transfer from computer to HC, and from HC to locomotive seems quicker to me but I did not time and compare it.

The knob is nicely done.  The old knob was smooth spinning (as is the new one) but often would feel like it was spinning when it actually wasn't.  I had this happen a lot when using my thumb to move it.  The new knob has the rubber insert (I like the Railpro logo on it) and it solves that problem.  The feedback while spinning the knob is great.  I also like how it is smaller and sticks up further.  Overall a much better feel to it.

Overall functionality is about the same compared to the HC-2/b with a few small differences.  One of which is the controller settings menu.  Now you scroll through different menu pages similar to the Locomotive settings page.  Turning on the controller goes to a different splash page before going to the main menu screen.

The lanyard and swivel are great.  The swivel is 360 degree and the lanyard is well-made.  Of course you could always substitute one of your own.  For me (6' 0") the Railpro lanyard was the right height.

Overall very pleased with it.  I will need at least one or two more controllers, and they will for sure be the HC-3.  I'll let my kids use the HC-2.

-Kevin

WyldBill:
Thanks Al & Kevin for the additional insight into the new HC-3.
I pre-ordered mine from Bill yesterday, so I'm looking forward to using it once it comes in. Hopefully I'll have RP modules installed is a couple locos so I can try it out....lol


Thanks,
Bill

KPack:
One more picture that I forgot to add.  You can see the difference in the knob, the sharper angles on the edges of the case, and the texture on the case as well.  Also note the depth of the screen inside the case and the lanyard/swivel.

BN3022:
Is there a video or new tutorial on this new HC?

Navigation

[0] Message Index

[#] Next page

[*] Previous page