RailPro > RailPro Specific Help & Discussion

Accessory module

<< < (2/2)

Geek.Verve:

--- Quote from: KPack on January 20, 2016, 11:40:31 AM ---You could do that manually, but I believe with the AM-1S you can set it up to have crossing gates work automatically.  The AM-1S has inputs, which means you could put optic sensors on either side of the crossing that would trigger when a train passes.  You can create a program for the AM-1S that would start the crossing lights and sounds as long as the optic sensor is activated.  Once the train passes, the sensor is no longer activated, the lights and sounds cease.
--- End quote ---

Would it be possible to put a switch between the optic sensor and the crossing and activate the crossing only if the switch were thrown in that direction?

nodcc4me:
You could probably do that, but you also might be able to enable or disable it right from the controller.

Navigation

[0] Message Index

[*] Previous page