General > General Discussion

PWR-56 for powering AM-1 and AR modules?

<< < (2/2)

LVRR1856:
IMO, should be fine and long as the devices are rated for 15v. I believe the Meanwells have adjustment output dial you turn with a screw driver. See if you can match the voltage output of the PWR56 ? Maybe 14.7 ?

Check the meanwell with a volt meter 15v output might actually be 15.5 etc ... just like HO DC transformers, some can put out 16 volts wide open.

carpediem4570:
Oh geez, thank you folks.  I really appreciate the input.

I will try my dc power packs and if that doesn’t work, I will look at the meanwell.

Thanks again for the input.

Kind regards,

Max

Navigation

[0] Message Index

[*] Previous page