RailPro > RailPro Specific Help & Discussion

Over Amp motor issue with LM-4S-G

<< < (2/2)

gregeusa:
Not to disparage RP, but clearly the amp rating is not average, but peaks.

Try the power resistor as suggested... 1/2 ohm should do it, if not 1 ohm.

It will lower the top speed of the loco a tiny bit, but will most likely work.

Get the ones in the extruded aluminum body, and bolt down to some metal to dissipate the heat.

Navigation

[0] Message Index

[*] Previous page