RailPro > RailPro Specific Help & Discussion
Adding an engine
Alan:
I would think eventually coupler strength becomes the limiting factor. Imagine what the drawbar force must be like on the last loco's rear coupler in an 8 unit lashup.
William Brillinger:
I believe I have confused another conversation. I take back my statement about the max number of locomotives that can be mu'd in the real world. I believe it was a "limit" imposed by policy on the railroad in question.
Dean:
The consisting of RailPro is unbelievable. I put three engines at the front of the train and two more towards the end of the train, all powered. There is no lurching, stalling, or dragging. Every engine runs extremely smooth. Beats anything DCC.
Alan:
Welcome to the dark side.
Dean:
It seems like you must individually remove each engine in a consist in the HC-1 to stay below the 12 engine engine limit. When switching from one consist to another, you can get the warning that you have reached the 12 engine limit.
You don't have to break the consist up. But you must do the zero speed / ten second wait for each engine in the consist.
Hopefully this will be addressed in a future update.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version