RailPro > RailPro Specific Help & Discussion

PWR-56 Installation

<< < (2/2)

Archive:
Originally posted by William Brillinger on the RailPro Users Yahoo! Group on Jul 28, 2015

Yes, These lights:
http://model-railroad-hobbyist.com/node/21591?page=7#comment-202135

Prostreetamx:
We use those LED power supplies a lot in the Trade Show industry. They are overload protected and not very expensive at all. They are very well regulated at 12 or 24v depending on the model. I am using mine to supply my LED street and building lights. Considering running a separate 12v buss, just like my track power feeders so I can run all my LED building lights from one source. Could also use this power supply to indicate switch positions if I add another set of points to my manual switch controls.
 We also use a lot of those power supplies like the PWR-45 pictured and many are installed in a non-ventilated part of a wall or sign with no heat issues as long as they are not overloaded. As long as you keep some air around them without grouping a bunch of supplies together, I doubt heat will ever be an issue.

Navigation

[0] Message Index

[*] Previous page