RailPro > RailPro Specific Help & Discussion
Making a Lanyard for your RailPro HC
William Brillinger:
Thanks Guys, All the credit for this idea goes to Lee Nicholas.
As a side note, I have a longer wider strap that when placed over only 1 shoulder and
under the arm, allows the HC to sit nicely on my hip too.
Lee Nicholas:
Bill
Thanks for sharing the eye-bolt lanyard hardware. I bought a few commercial lanyards but they are to short at 36" so my son (a saddle maker) cut one out of chap leather for me at 40" much better. I like the retractable idea and just ordered a 13 oz I'll let the group no how it works out.
Lee Nicholas
BruceRogers:
I remember speaking to Ring about this sometime back, he can add them if you wish. My Rail-Lynx throttles had them and I really liked it.
I don't know what the cost would be but Tim did mention something regarding the touchscreen requiring re-calibration after it had been out of the housing.
William Brillinger:
--- Quote ---Tim did mention something regarding the touchscreen requiring re-calibration after it had been out of the housing.
--- End quote ---
I wouldn't know why. It has a nice little bezel to lock in the position.
nodcc4me:
Bill, I take it you haven't experienced any problems so far like touching the buttons and getting the wrong response.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version