RailPro > RailPro Specific Help & Discussion

First post! Questions on layout wiring

<< < (2/2)

Alan:
I suggest you read the 3 posts labeled "Powering the LK&O" and then the series labeled "Laying Track" which is a detailed look at construction and wiring of a module.

Keep in mind it is a blog so there is evolution as it progresses. Things change. For instance, the Laying Track post #1 says I planned to use CAT5 cable wires for feeders but by Laying Track post #3 I had discovered 24 AWG stranded worked much better so I made the switch. Stuff like this is why it is important to read all the way through in the sequence the posts were written. Nature of a blog.

Navigation

[0] Message Index

[*] Previous page

Go to full version