Greetings all! My name is Randy and I am building a 1:20.3 outdoor/indoor layout. I mostly am modeling RGS and have laid about 250 ft of code 215 and code 172 track and with llagas creek ties and turnouts and several scratch built stub turnouts in 215 and 172.
I have installed RailPro in a Bachmann Spectrum 2-6-0 tender, a Bachmann Forney (along with a modified Bachmann chuff circuit board for synchronized chuff) , and I have scratch built a loco similar to the RGS #4 Goose for my wife which I installed a Railpro system in. I have gathered sounds for making a gas engine sound file for the goose, that revs up and shifts gears as speed increases. I Joined this forum because I cannot seem to find any information on creating a prime mover sound file like the Railpro diesel files that auto notch up when speed increases. I have made files that start, idle and shut down, and manually rev up and shift gears using individual buttons on the HC, but would like to create a sound file that does this all automatically.
I also have several Airwire and Phoenix systems installed in several Bachmann c-19's, and had a Phoenix P-8 installed in the Bachmann 2-6-0 along with the RailPro, so that the chuffs would be synchronized. (That was a VERY tight fit which eventually resulted in shorting out the railpro, so I installed another modified bachmann chuff circuitboard and removed the P-8 for more space).
Hope to work with you all in making our hobby more fun!