RailPro > RailPro Specific Help & Discussion

Charging Issue

(1/2) > >>

rbdamon:

I am a new Railpro user. I have purchased an HC-2 and when I charge it charges but eventually the battery indicator bar only goes to the 3/4 mark and then I get the message on the Display "Faulted Charger Under Current" I think at this point it is fully charged even though the indicator is incorrect. It seems to work ok but this is not the behavior I would expect. Anyone seem this before?


Ben

Alan:
See if this helps you https://rpug.pdc.ca/index.php/topic,582.msg4538.html#msg4538

William Brillinger:
Make sure your HC is updated with the latest program, REV. 2.03 and then perform the drain down and full charge as described at the link Alan provided.

rbdamon:
So my attempt to upgrade to 2.03 isn't going so well. Not sure why I received a product with older firmware? This was new stock. Anyways as a Mac user (hint hint) I had to drag out the only laptop with I have with Windows 7 that I keep for such emergencies and although I have loaded a sound file ok the controller upgrade continues to error out with the message "Timeout waiting for file"

Update
Ok I spoke too soon after a reboot I was able to update to 2.03

William Brillinger:
2.03 for the HC is quite recent. It would only be loaded on product that left Ring in the first week of January or later.

Navigation

[0] Message Index

[#] Next page