RailPro > RailPro Specific Help & Discussion
Sound Setup Help
emd_16645:
It's been a while since I've posted here, RP got put on the back shelf a bit.
So, I finally got around to installing some LM3S in a couple of locomotives. First install went fine (mostly, but I'm happy in the end). Went to work on the next one, and I'm having issues loading the sounds I want onto the chip. I am attempting to load the same files as the first install. However, when I go to select the different sounds on the button setup page, I am presented with only a generic bell, horn and diesel sounds, not the ones I loaded onto my CI-1.
Any suggestions on how to get the LM3S to recognize the ULT file?
Tom:
One option is to update the LM-3S software as they do not always come with the latest version installed. I have noticed that the CI-1 can be a little cantankerous. Maybe just copy the sounds again onto the LM-3S and/or download to the CI-1 then copy to the LM-3S again.
Tom
nodcc4me:
Chris, it sounds like you haven’t copied the files onto the LM3s. If they are on the CI-1, copy them over to the module, then try to set them up.
emd_16645:
I forgot the loading step. That solved the issue, thanks guys. I have noticed that the CI-1 is a little off, I keep having to reload the picture file for it to show up on the menu, even though I save after. But until I can justify a HC-2, its what I have.
G8B4Life:
Chris,
Just to take your thread a little off course, the last time you were posting here back in March you could not get Rings software to download and work and had to use the offline installers that used to be provided here. It seems from your latest posts you can now download from RE. Could you tell us what you had to do to fix your connection issue? I like to keep track of the fixes folks have had to make to get something that should work first time for everybody to work; it adds to the knowledge base so others can be helped in the future.
- Tim
Navigation
[0] Message Index
[#] Next page
Go to full version