RailPro > RailPro Specific Help & Discussion
Beyond Frustrated with Railpro
emd_16645:
Well, I did have the laptop sitting in the yard a couple of feet from the loco. But I can move it closer.
And to confirm Tim, the download screen matched the 2.05 screenshot, not the 1.31 you posted.
Alan:
If you have on hand a USB cable use it to move the CI-1 away from the computer itself. (refer pg3 of the manual)
G8B4Life:
It would be interesting to find out what the useful range of the CI-1 is. I have successfully used it to copy files to an LM over 10 feet away through a wall, but they were small files (pictures and light effects). Both times I got the cannot connect message was with copying large files like prime mover files (and tonight the CI-1 was only about 12 inches from the LM and the copying was about half way through). I guess the reason to have the CI-1 so close when copying is to have the best signal strength possible. While the power output of the CI-1 is probably decent I imagine it's not in the same league as the wireless router etc that would be used in a home.
Chris, thanks for the clarification. I'm still at a loss as to the funky screen when HC Sim crashed but I'm working on it. I'm still working on checking permissions as well for the HC Sim looses downloaded files etc problem. I don't have Win10 so I have to find out how to check folder permissions in Win10 first, it's probably different to other versions of Windows. Let us know how you go with the CI-1 closer to the LM when copying the 710 ULT engine file. Be aware that you might not be able to use the ULT engine without updating the LM's product program first.
- Tim
emd_16645:
Tim, I will report back tonight. The LM3S is on version 2.07. I have successfully used the FDL ULT file on this chip (since removed). I do need to update the LM3S to 2.09 so I can use the ULT horn files.
emd_16645:
I guess this wasn’t close enough...
https://www.flickr.com/gp/33511925@N05/5twE3R
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version