RailPro > RailPro Specific Help & Discussion

Can't find Pwr-56 on some of my HC2's

<< < (2/3) > >>

Coupe633:
SWA737 I was searching for some answers on the HC-2B and found this thread and thought I might find the answer from you since you have several HC-2B's. You seem to have a similar set up as I am planning since I have a larger room to set up my empire. I am planning for 4 PWR-56's all scattered around my 39 x 59 space. I plan to purchase at least one more HC-2B and this brings me to my question. After programming my locomotives on my HC-2B how would I go about downloading all the information from my original H-2B to a second one? I would hate to have to program a second one from scratch. I will ultimately have about 60 locomotives and that many LM3(s) programmed into that bad boy.

David Cooper

nodcc4me:
To my knowledge, there is no way to copy files from one HC to another.

G8B4Life:
Al is correct, you can't copy from one HC to another. That said you don't have to "program" the second HC like you did when you were setting up the LM's with the first HC, you'll simply detect and save each LM on the second HC and all button settings etc will be as they are on the first HC.

Now, as to the OP, I don't know how I missed this question nearly 4 years ago but the answer is: You can't have more than 4 PWR-56's saved into the HC. Better late than never I suppose.

- Tim

Gibs:
Better Read it again Tim, he only has 4 x PWR-56. The problem he is having is that he cant get all of his HC's to detect them, which they should. He has 9 HC's, of different types, but that should not be an issue....but it is.
Ring Ring......
God Ive been waiting to say that  lol.

ON28:
Only 4 PWR per HC? Could be limiting for some people. A friend has 12 boosters on his large DCC layout, as he prefers a separate power source for each of his mainlines and branches.

Navigation

[0] Message Index

[#] Next page

[*] Previous page