RailPro > RailPro Specific Help & Discussion

Buss wiring to support RailPro and normal DCC

<< < (2/2)

William Brillinger:
One of the beauties of RailPro is that it will run on any track that has at ~14V on it. you can take your Railpro units to anybody DCC layout and run them. If you already have DCC on your layout, keep it. Then your friends can bring their DCC units and rum them too.

KPack:
First of all, welcome to the forum.

Second, Bill is right.  There is no need to run two separate buss wires.  Railpro will work on any DCC-powered layout without any issues.  You'll find that Railpro is far more capable than it first seems.  14 volts is ideal, but I've run Railpro on lower voltage without problem.  The starting and top speed will feel a little different with a lower voltage, but it's totally usable. 

Just put your Railpro locomotives on the track and have fun.  It's that simple.

-Kevin

Pequeajim:
Thank you Bill and Kevin.  That is exactly what I'm going to do... 😊

Pequeajim:
And your right.  It works fine.

Navigation

[0] Message Index

[*] Previous page