Author Topic: Using the quick plug on Kato -9.  (Read 7167 times)

KiloWhiskey

  • Engineer
  • ***
  • Posts: 61
  • Kevin W.
Using the quick plug on Kato -9.
« on: March 06, 2020, 08:35:09 PM »
I bought a brand new current production KATO -9, popped a speaker and a LM3s using a 9 to 8 pin connector, orange pin is on the marker position.  Train runs smooth, sound works but no lights on the mother board illuminate when the appropriate button is toggled. I will order a harness and LEDs to do the lights proper, but any ideas on why?

Thanks
Kevin
Kevin


In my defense, I was left unsupervised....

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1342
    • Precision Design Co.
Re: Using the quick plug on Kato -9.
« Reply #1 on: March 07, 2020, 06:20:51 AM »
I expect the 8 pin plug is backwards. Power will still work, but the accessories will not when it's in the wrong way.
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.


KiloWhiskey

  • Engineer
  • ***
  • Posts: 61
  • Kevin W.
Re: Using the quick plug on Kato -9.
« Reply #2 on: March 07, 2020, 08:44:41 PM »
Just swapped it and tried... no joy. So I put it back and will order LEDs....

Thanks
Kevin
Kevin


In my defense, I was left unsupervised....