RailPro User Group
RailPro => RailPro Specific Help & Discussion => Topic started by: rayliptak on June 01, 2022, 07:31:08 AM
-
Hello,
Is there a way to control turnouts thru an AM1 OR with a switch control box?? The old fashioned way.
The reason for the question is because some of my loco's are controlled by a different controller/non-RailPro so I don't always need to have my HC-2 for a session. I'd like the option to have to rely solely on the HC-2 for turnout control.
Thanks.
-
You can, but you will need some other hardware. A similar thing was done in this thread (https://rpug.pdc.ca/index.php/topic,261 (https://rpug.pdc.ca/index.php/topic,261)) but it used an AM-1 and a DCC board. The DCC board was set up like a "push button" so I can't see why a physical push button wouldn't work. I don't know much about the whole set up from that thread though.
- Tim
-
Hi Tim,
Thanks for the info, I'll check out that thread.