RailPro User Group
General => General Discussion => Topic started by: CampbellRice on December 05, 2019, 05:53:15 PM
-
I met this guy at Trainfest who had made holders for the NCE Powercab and I asked him if he could make them for the RailPro. I sent him mine and he was able to design these.
https://www.ebay.com/itm/Rail-Pro-Throttle-Holder-By-Wrought-iron-Express/274129264384?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908103841%26meid%3D6233d7ebf8554da4810c2d45a50cb697%26pid%3D100227%26rk%3D2%26rkt%3D9%26sd%3D274129268518%26itm%3D274129264384%26pmt%3D0%26noa%3D1%26pg%3D2053904&_trksid=p2053904.c100227.m3827
-
Our host offers this: https://www.pdc.ca/rr/catalog/product/railpro-hc-2-throttle-holder/56 (https://www.pdc.ca/rr/catalog/product/railpro-hc-2-throttle-holder/56)
Now the world has two options, a 200% increase!
-
Those are neat. It would also be nice to have a tab molded into the bottom of the HC, to attach a lanyard. Lee Nicolas uses lanyards on his layout.
-
Bill had eye hooks for awhile, but I don’t think he has them now. The parts are probably available.
Here is a simple holder I built for the layout.
-
Those are neat. It would also be nice to have a tab molded into the bottom of the HC, to attach a lanyard. Lee Nicolas uses lanyards on his layout.
Here is a thread on lanyards for the HC. I still have a few left.
https://rpug.pdc.ca/index.php/topic,365.0.html