RailPro User Group
General => General Discussion => Topic started by: Dean on July 01, 2018, 11:31:29 PM
-
How would you wire this into a RailPro decoder? Add a momentary pushbutton to the Engines page in the HC?
https://www.smart-coupler.com/ (https://www.smart-coupler.com/)
-
Looking at the video using the momentary push button should work. The small circuit board must provide some sort of delay to the motion.
-
This is cool but why a Kadee? It's the DCC equivalent of HO couplers. This needs to be applied to a Sergent coupler.