RailPro User Group

RailPro => RailPro Specific Help & Discussion => Topic started by: OccamsRazor on February 25, 2023, 11:50:35 PM

Title: LM-3S Outputs/Inputs(?)
Post by: OccamsRazor on February 25, 2023, 11:50:35 PM

Hello All,

After a couple of installs I seem to be somewhat getting the hang of installation pitfalls.

Alas... Today as I was installing a LM-3S into a ScaleTrains GE ES44AC, (the CSX 1776 ;D), I noticed something that had not come up for me before.

The LM-3S documentation shows the following diagram:

9 Pin Connector
Output 3 - (Green)
Rail 1 (Red)
Motor + (Orange)
Common + (Blue)
Output 1 (white)
Output 2 (Yellow)
Motor - (Grey)
Rail 2 (Black)
Output 4 (Violet)

So far. So good.

6 Pin Connector
Output 5 (Green)
Output 6 (Violet)
Negative (Yellow) ???
Input 1 (White) ???
Speaker (Brown)
Speaker (Brown)

Curious as to what would be the purpose on a locomotive for the Negative and the Input?

Title: Re: LM-3S Outputs/Inputs(?)
Post by: G8B4Life on February 26, 2023, 03:37:47 AM

The negative is used with a stay alive. The input currently doesn't have a use when the LM is functioning as a locomotive module but can be used if the LM is used as an accessory module.

- Tim

Title: Re: LM-3S Outputs/Inputs(?)
Post by: William Brillinger on February 26, 2023, 06:19:02 AM

There is a diagram here:
https://rpug.pdc.ca/index.php/topic,383.msg2867.html

Instructions for installing the Ring PBM-2 (their stay-alive) can be found here:
https://ringengineering.com/RailPro/Documents/PbmInstructions.pdf

Title: Re: LM-3S Outputs/Inputs(?)
Post by: gregeusa on February 26, 2023, 02:40:51 PM

Isn't the white input the chuff trigger for steamers?

Title: Re: LM-3S Outputs/Inputs(?)
Post by: OccamsRazor on February 26, 2023, 08:51:54 PM

Thank you all!

Title: Re: LM-3S Outputs/Inputs(?)
Post by: JRad on February 27, 2023, 04:20:17 PM

Quote from: gregeusa on February 26, 2023, 02:40:51 PM

Isn't the white input the chuff trigger for steamers?

Only on the "G Scale" units where the wire color is purple.