RailPro User Group
General => General Discussion => Topic started by: Espeelark on March 29, 2021, 08:47:09 PM
-
So what is the voltage output from each of the output wires (output #1/white, output #2/yellow, output #3/green, output#4/violet, output #5/green, output #6/violet) and the two brown speaker wires as depicted in the wiring diagram shown on the bottom of page two of Ring's LM-3S Installation Instructions?
https://www.ringengineering.com/RailPro/Documents/LM-3Instructions.pdf (https://www.ringengineering.com/RailPro/Documents/LM-3Instructions.pdf)
I've got an idea of what they are but I can't seem to find the values (as designed by Ring) delineated anywhere. You know the old saying, "inquiring minds want to know!"
-
Covered way back here: https://rpug.pdc.ca/index.php/topic,189.0.html (https://rpug.pdc.ca/index.php/topic,189.0.html). The output voltage is about half a volt lower than track (ie, input) voltage.
Speakers I have no idea what they are fed with.
- Tim
-
Thanks Tim!
Sorry for having posted a repeated topic. :-[
I performed various searches using different words/wording each time and never came across that thread. Perhaps because of its age/date it was a couple pages back in the search results and I never paged back that far.
-
No apology needed! No worries!
-
Yep, no apologies needed.
That topic was for the LM-2S but the output voltage didn't change from the LM-2S to LM-3S.
Handy hint: if your searching for something using two words that you want to appear next to each other, eg output voltage put them in a pair of quotes vis "output voltage". This reduced the search results to 17 from 52.
- Tim