RailPro User Group
RailPro => RailPro Specific Help & Discussion => Topic started by: rbdamon on January 21, 2018, 06:05:43 PM
-
I am a new Railpro user. I have purchased an HC-2 and when I charge it charges but eventually the battery indicator bar only goes to the 3/4 mark and then I get the message on the Display "Faulted Charger Under Current" I think at this point it is fully charged even though the indicator is incorrect. It seems to work ok but this is not the behavior I would expect. Anyone seem this before?
Ben
-
See if this helps you https://rpug.pdc.ca/index.php/topic,582.msg4538.html#msg4538 (https://rpug.pdc.ca/index.php/topic,582.msg4538.html#msg4538)
-
Make sure your HC is updated with the latest program, REV. 2.03 and then perform the drain down and full charge as described at the link Alan provided.
-
So my attempt to upgrade to 2.03 isn't going so well. Not sure why I received a product with older firmware? This was new stock. Anyways as a Mac user (hint hint) I had to drag out the only laptop with I have with Windows 7 that I keep for such emergencies and although I have loaded a sound file ok the controller upgrade continues to error out with the message "Timeout waiting for file"
Update
Ok I spoke too soon after a reboot I was able to update to 2.03
-
2.03 for the HC is quite recent. It would only be loaded on product that left Ring in the first week of January or later.
-
2.03 for the HC is quite recent. It would only be loaded on product that left Ring in the first week of January or later.
Ok that makes sense. I purchased early Dec. and had to wait a couple weeks for new stock to arrive. Will let drain the battery tonight.
Thanks for all the help!!
-
Issue resolved! Thank you, Bill and Alan!!
-
Issue resolved! Thank you, Bill and Alan!!
Fantastic!