RailPro User Group

RailPro => RailPro Specific Help & Discussion => Topic started by: Smoke on September 18, 2023, 12:28:08 PM

Title: LM-3S JST Female Connectors
Post by: Smoke on September 18, 2023, 12:28:08 PM

Passing this along as info in case anyone has any interest/need to build your own harnesses for LM-3S modules, these are the correct part numbers for the connectors and terminals. DigiKey carries the connectors and terminals, others may as well.

To properly crimp the terminals, you will need a crimping tool with a crimp diameter of 1.0mm. There are several crimp tools available that would work and are relatively inexpensive, the one I use is included below (Initially bought for my other hobby of cars).


ZHR-9: 9-pin connector
ZHR-6: 6 pin connector
SZH-002T-P0.5: Female connector pins
Crimp Tool: Engineer PAD-11

Title: Re: LM-3S JST Female Connectors
Post by: KPack on September 19, 2023, 12:12:39 PM

Thanks for the information.  Good to have another source in case it is needed.

Currently I just buy all the harnesses from Bill when I buy more locomotive modules.

-Kevin

Title: Re: LM-3S JST Female Connectors
Post by: Smoke on September 29, 2023, 11:00:01 AM

I get mine from Bill as well. Truth be told, the desire to find the connectors for RailPro was spurred by a question on another forum about JST connectors and had me curious enough to investigate.

Title: Re: LM-3S JST Female Connectors
Post by: BillG on September 29, 2023, 12:39:43 PM

I am new who is Bill .. I would like to see what he offers in a harness.

Title: Re: LM-3S JST Female Connectors
Post by: faithie999 on September 29, 2023, 05:24:51 PM

Bill's company hosts this forum.  His name is Bill Brillinger.

his company's website is

pdc.ca

he has great prices on all RailPro gear and is a great guy.  he is in Canada but he ships to US. 

Ken

Title: Re: LM-3S JST Female Connectors
Post by: BillG on September 29, 2023, 05:41:14 PM

Ken.
   Thank you . I will give a visit to Bill's website. 

Title: Re: LM-3S JST Female Connectors
Post by: William Brillinger on September 30, 2023, 09:42:41 PM

Thanks everyone!

For clarification, yes I am in Canada, but we ship US orders from North Dakota.

http://www.pdc.ca

Cheers,
- Bill