RailPro User Group
RailPro => RailPro Specific Help & Discussion => Topic started by: ron045 on August 05, 2021, 05:59:59 PM
-
I'm starting my 2nd install. I am upgrading an O scale MTH proto 1 GP38. That model has electronic proto couplers.
I can't get RP to fire the coupler with the +5v. I have read those older MTH couplers need 12v.
Has anyone successfully hooked up electro couplers?
Thanks.
Ron
-
You can always look into a voltage step-up converter. Pololu makes some that are small are easy to use. I had to use a 3.7 to 12 volt converter for my battery powered locomotive. The battery only puts out 3.7 volts but the LM needs 12-14. Works like a charm.
For your situation, you could put one on the output wires going to the couplers. As far as I know that should work.
-Kevin
-
You can always look into a voltage step-up converter. Pololu makes some that are small are easy to use. I had to use a 3.7 to 12 volt converter for my battery powered locomotive. The battery only puts out 3.7 volts but the LM needs 12-14. Works like a charm.
For your situation, you could put one on the output wires going to the couplers. As far as I know that should work.
-Kevin
I never heard of such a thing. I'll look into it. Thank you.
-
Is this it?
https://www.amazon.com/Pololu-Step-Up-Step-Down-Regulator-S10V2F12/dp/B016YSK3VC/ref=sr_1_3?dchild=1&keywords=pololu+voltage+converter&qid=1628250578&sr=8-3 (https://www.amazon.com/Pololu-Step-Up-Step-Down-Regulator-S10V2F12/dp/B016YSK3VC/ref=sr_1_3?dchild=1&keywords=pololu+voltage+converter&qid=1628250578&sr=8-3)
-
Or simply a small 5V coil relay.