RailPro User Group
General => General Discussion => Topic started by: G8B4Life on May 02, 2020, 10:40:08 AM
-
While looking around for ways to avoid hardwiring my latest purchase (thanks for the mass of same colour wires Athearn!) I found what I was looking for, a proper 21 pin solder pad breakout board. I haven't bought any at the moment as the board is too long for the space available to me; and I've not used AliExpress before and I'm a bit loath to try them, so I'm putting them out there to the group incase anyone else sees a use for their installs:
https://www.aliexpress.com/item/32885829171.html?src=bing&albslr=230308992&isdl=y (https://www.aliexpress.com/item/32885829171.html?src=bing&albslr=230308992&isdl=y)
The board length isn't given but it appears to be about 5 time the width of the plug itself so the approximate length of the board could be worked out from the NMRA DCC standard.
I know TCS and SoundTraxx sell something similar, but they are only 9 + 2 (speaker) solder pads and they are not well priced for what they are.
- Tim
-
These TCS boards appear to have enough pads to cover a Railpro install. Not the cheapest, but available a bit cheaper elsewhere. I just ordered a pack tonight for my own installs, I'll try to let you know how it goes.
https://tcsdcc.com/1358
-
Those TCS boards must have changed very recently, this is what it used to be; only enough pads for the 9 pin JST.
(https://i.ebayimg.com/images/g/xFYAAOSwF7xeli0o/s-l1600.jpg)
Now that they've gone solder pads for 17 of the 21 pins which works for RP with it's two harnesses I'll have to look and see if I can find them at a good price. Bill, these new TCS breakout boards might be something to look at stocking.
Of note, TCS also now has the mating male 21 pin board.
- Tim
-
Bill, these new TCS breakout boards might be something to look at stocking.
Of note, TCS also now has the mating male 21 pin board.
I'll look into it!
-
I can sell these for $21 US per 5 pack including shipping in the USA.
https://tcsdcc.com/1358
https://tcsdcc.com/1653
If anyone is interested in these boards, please let me know.