RailPro User Group

RailPro => RailPro Specific Help & Discussion => Topic started by: Davidbross on March 24, 2024, 12:01:55 PM

Title: New prime mover won’t copy to engine
Post by: Davidbross on March 24, 2024, 12:01:55 PM

Help appreciated

Brand new lm4sg board. I made room
By deleting prime mover and other files.

I’ve tried to copy over a new ult prime mover. It won’t copy.  After attempting for a while it gives error message.

I then tried copying the same engine but in the older non ult. Same thing.

I’ve tried two different computers that I’ve used many times for this before.


I can get other sounds like horn or bell to copy.


Thoughts?   My best guess is that the original file didn’t fully delete so there’s not room.  I say that because the deletion happened pretty quickly.

Title: Re: New prime mover won’t copy to engine
Post by: JRad on March 26, 2024, 09:28:27 AM

What is the error message?

Do you have the LM close to the HC or the PC you are copying from?

Is everything up to date software wise?

Title: Re: New prime mover won’t copy to engine
Post by: Davidbross on July 05, 2024, 03:30:19 PM

Close.