RailPro User Group
RailPro => RailPro Specific Help & Discussion => Topic started by: zr1rob on May 16, 2025, 08:31:07 PM
-
I "Removed" an LMS4G using the HC-2b.
Put it in another loco, powered it up, but "Find Product" doesn't find it.
After removing a module, can it be placed in another loco or are they one use only?
Thanks,Rob
-
They are definitely multi use. You can take it out and put it in what you like as many times as you want.
If all you did was physically remove the LM and reinstall it in another loco and nothing else then find product won't find it because the HC still has it in it's list of modules. You'll just have to find it in the existing list as the old locomotive and change the picture and settings you want.
If you removed the LM from the HC as well using the remove product button and find product isn't re-finding it then check your wiring to the LM. It's also possible that it wasn't removed properly from the HC's list in which case you'd have to use the remove all products button to properly delete it from the HC. You then have to add everything back to the HC.
- Tim