RailPro User Group

RailPro => RailPro Specific Help & Discussion => Topic started by: snowdog on February 22, 2026, 08:18:07 PM

Title: Full load current setting with traction tires
Post by: snowdog on February 22, 2026, 08:18:07 PM

Hey gang,

I have not been able to find this in this forum...how does one go about setting full load current on locomotives with traction tires?

TIA

Title: Re: Full load current setting with traction tires
Post by: G8B4Life on February 23, 2026, 07:33:00 AM

That's a really good question. You've pretty much only got two choices, you can try the normal way by holding back the locomotive and using the auto set method, and if that doesn't work you'll have to set the full load current manually using your best judgement.

- Tim