RailPro User Group
RailPro => RailPro Software Updates => Topic started by: gerard143 on April 14, 2026, 10:49:04 AM
-
Good Day,
Bought an HC-3-Sun like 8 months back. Took it out of box last night to put a charge on it. Updating to 1.13 firmware took many tries. I noticed after doing this nothing shows under locomotives, turnouts, accessories. Those pages all show blank when you click into them. From the factory I recall at least the locomotives page having some images in there.
So I went to load some new locomotive pics in there. Took a couple tries but got some on the device, however the locomotive page still shows blank with no images in it. Is this correct? Will they not show up again until I pair it with an LM-3 or something? I did verify under the delete menu that the image files are indeed on the HC-3.
-
Until you pair the HC with a module (LM, AR etc.) Nothing will show on those pages.
The locomotive photo needs to be uploaded to the LM from the HC once it has been paired (found). When that is done, you need to change the setting for locomotive picture on the LM, using the HC. LM's will always display the default image (Ring Diesel) when first found.
-
awesome!! thank you