RailPro User Group

RailPro => RailPro Specific Help & Discussion => Topic started by: Abiqua on November 23, 2015, 06:09:09 PM

Title: LM-2S pins
Post by: Abiqua on November 23, 2015, 06:09:09 PM

I have found this information before but can't seem to find it now. The LM-2S sound end is a 6 pin plug.  How many pins on the operations end?  I am about to hardwire a DCC plug in a DC loco and want to us the correct plug (8, 9, or 21 pins). Thanks for you assistance.

Title: Re: LM-2S pins
Post by: Alan on November 23, 2015, 06:13:35 PM

9 pins on the functions side. 6 pins on the sound side. Refer to last page of this document: http://www.ringengineering.com/RailPro/Documents/LM-2Instructions.pdf (http://www.ringengineering.com/RailPro/Documents/LM-2Instructions.pdf)
I use generic version of the Digitrax 9 pin connector DHWH: http://www.digitrax.com/products/mobile-decoders/dhwh/ (http://www.digitrax.com/products/mobile-decoders/dhwh/)

Title: Re: LM-2S pins
Post by: Abiqua on November 24, 2015, 12:03:14 AM

Thank you Alan. I looked and looked but could not find that info.