RailPro User Group

RailPro => RailPro Specific Help & Discussion => Topic started by: mechpaul76 on November 08, 2015, 11:51:07 AM

Title: feeder wires
Post by: mechpaul76 on November 08, 2015, 11:51:07 AM

do you use feeder wires with rail pro
Thanks

Title: Re: feeder wires
Post by: William Brillinger on November 08, 2015, 12:19:12 PM

referring to wiring track?

Yes, even power distribution is still needed. Run feeders to every piece of track if possible.

Title: Re: feeder wires
Post by: hirailer on November 08, 2015, 03:22:20 PM

I place feeder wires on every section of track. I find that wire joiners are not reliable conductors. Some people solder their track sections together, there again, I find this is not reliable as the solder connections are prone to separating in time.

Mel

Title: Re: feeder wires
Post by: Alan on November 09, 2015, 05:37:57 PM

Yep. No different than DCC or DC. Like Bill, I am also a fan of feeders to every piece of track. Cheap insurance for trouble-free operation.