RailPro User Group

RailPro => RailPro Specific Help & Discussion => Topic started by: KiloWhiskey on February 01, 2019, 09:34:01 AM

Title: LM3 input lead on the 6 wire harness.
Post by: KiloWhiskey on February 01, 2019, 09:34:01 AM
Are there uses for the input (white wire) on the LM3.     
I apologize if this was covered prior.
Title: Re: LM3 input lead on the 6 wire harness.
Post by: Alan on February 01, 2019, 09:55:59 AM
Are there uses for the input (white wire) on the LM3.     
I apologize if this was covered prior.

TBMK the white input wire is used only in the User Custom Accessory Projects within RailPro Assistant when feature enable is purchased.
Title: Re: LM3 input lead on the 6 wire harness.
Post by: KiloWhiskey on February 01, 2019, 01:49:09 PM
I read the info for the rp assistant,  and only saw references to the AM 1... does the rp assistant and  simulator need the USB transmitter to work? As it seemed to lock up on me. Ill advise on versions and such when i get home.
Title: Re: LM3 input lead on the 6 wire harness.
Post by: BruceRogers on February 01, 2019, 03:18:14 PM
When using the HC Simulator you will need to use the CI-1 to transfer files to, or operate any LM module. I have mine on a USB extension cable to keep it as close as possible to model I'm uploading files to.