41
RailPro Specific Help & Discussion / Re: Saved accessory project
« Last post by Mazzone on February 19, 2024, 09:39:03 AM »Thanks for that info, it’s an old laptop and I’m not very good with computers so maybe the storage is full.
Recent Posts
42
RailPro Specific Help & Discussion / Re: AM-1B update
« Last post by Jim Agnew on February 19, 2024, 06:30:19 AM »I’m getting a yellow block on the Home Screen of the HC.
43
RailPro Specific Help & Discussion / Re: looking for trolly sounds
« Last post by G8B4Life on February 19, 2024, 05:46:40 AM »There's nothing available that I know of. Remember too, that any sound that a RailPro user could make available would only be bells, gongs etc. Users can't make prime mover (or in your case, traction motor whine) sounds.
- Tim
- Tim
44
RailPro Specific Help & Discussion / Re: AM-1B update
« Last post by G8B4Life on February 19, 2024, 05:43:15 AM »Which picture is that? can you describe what it looks like?
- Tim
- Tim
45
RailPro Specific Help & Discussion / Re: Saved accessory project
« Last post by G8B4Life on February 19, 2024, 05:41:43 AM »No, they do not get deleted from RailPro Assistant when you copy them to the accessory module so it should still be there in RPA, unless you accidentally deleted it. The only other possibility that I can think of, which is a long shot as it's been years since I've seen something along these lines so I may be remembering wrong is although you "saved" it (you had to to be able to load it to a module) it actually wasn't saved to disk due to write permissions, or the storage file is full. If other stuff you've written / downloaded has remained in RPA after you've closed and reopened RPA then write permissions isn't the problem. Is your storage file full ? (RPA gives a percent free indicator).
- Tim
- Tim
46
RailPro Specific Help & Discussion / Re: AM-1B update
« Last post by Jim Agnew on February 18, 2024, 02:27:21 PM »Yes, I initially loaded the wrong file. Have recovered from that error, but now I’m missing the accessory picture and can’t find the one I need.
47
RailPro Specific Help & Discussion / Saved accessory project
« Last post by Mazzone on February 18, 2024, 08:54:56 AM »Hi all,
I have created an accessory project for lighting control and loaded it to an am-1S and everything works great, now I would like to edit that project to add sounds but when I open project manager it doesn’t show any project files on the computer. I did save the project before I loaded it to the handheld. Is it removed from Railpro assistant after it’s loaded to the handheld? Thanks for any help!
John
I have created an accessory project for lighting control and loaded it to an am-1S and everything works great, now I would like to edit that project to add sounds but when I open project manager it doesn’t show any project files on the computer. I did save the project before I loaded it to the handheld. Is it removed from Railpro assistant after it’s loaded to the handheld? Thanks for any help!
John
48
RailPro Specific Help & Discussion / Re: AM-1B update
« Last post by G8B4Life on February 18, 2024, 04:41:35 AM »Nobodies reported that warning here before, but not many here use the AM-1b in either of it's varieties as far as I know.
All I can suggest is to ask if you updated your AM-1b with the correct program; there is the normal program and the accessory program; you need the normal program to control points (that's switches to most of you all reading this).
If you did update with the correct program then try re-saving any settings in the AM-1b and see if it will do the trick. If all that fails then I guess a call to Ring Engineering will be in order.
- Tim
All I can suggest is to ask if you updated your AM-1b with the correct program; there is the normal program and the accessory program; you need the normal program to control points (that's switches to most of you all reading this).
If you did update with the correct program then try re-saving any settings in the AM-1b and see if it will do the trick. If all that fails then I guess a call to Ring Engineering will be in order.
- Tim
49
RailPro Specific Help & Discussion / Re: Ring MIA at Springfield
« Last post by mcbunton on February 15, 2024, 04:03:18 PM »Would have thought Don Sweet would be there as a dealer? He's from NH and supports that show I believe.
50
RailPro Specific Help & Discussion / AM-1B update
« Last post by Jim Agnew on February 15, 2024, 01:53:21 PM »After updating to Rev 1.20, I’m getting a “Loop Time Warning” and can no longer activate switches. Help!