Author Topic: Turnout Control with manual switches in addition to AM1  (Read 1254 times)

rayliptak

  • Brakeman
  • *
  • Posts: 2
Turnout Control with manual switches in addition to AM1
« on: June 01, 2022, 07:31:08 AM »
Hello,

Is there a way to control turnouts thru an AM1 OR with a switch control box?? The old fashioned way. 
The reason for the question is because some of my loco's are controlled by a different controller/non-RailPro so I don't always need to have my HC-2 for a session.  I'd like the option to have to rely solely on the HC-2 for turnout control.

Thanks.   


G8B4Life

  • Signalman (Global Mod)
  • Conductor
  • *****
  • Posts: 1192
  • I'll think of a catchy tag line one day
Re: Turnout Control with manual switches in addition to AM1
« Reply #1 on: June 01, 2022, 09:35:28 AM »
You can, but you will need some other hardware. A similar thing was done in this thread (https://rpug.pdc.ca/index.php/topic,261)  but it used an AM-1 and a DCC board. The DCC board was set up like a "push button" so I can't see why a physical push button wouldn't work. I don't know much about the whole set up from that thread though.

- Tim

rayliptak

  • Brakeman
  • *
  • Posts: 2
Re: Turnout Control with manual switches in addition to AM1
« Reply #2 on: June 01, 2022, 06:11:42 PM »
Hi Tim,

Thanks for the info, I'll check out that thread.