Author Topic: LM-2S input wires  (Read 1346 times)

brickmodder

  • Fireman
  • **
  • Posts: 18
LM-2S input wires
« on: May 21, 2016, 03:11:30 PM »
Does anyone know what the yellow and white input wires on the 6 pin connector are used for? I assume for initial programming/firmware updates (Ring Engineering use only).  Update: a teensy note on the instruction sheet says, "Inputs are for future use."
« Last Edit: May 21, 2016, 03:14:55 PM by brickmodder »