Author Topic: A cradle for your Railpro Power Supply Brick  (Read 4092 times)

Archive

  • Conductor
  • ****
  • Posts: 233
A cradle for your Railpro Power Supply Brick
« on: October 09, 2015, 02:10:30 PM »
Originally posted by William Brillinger on the RailPro Users Yahoo! Group on Jul 14, 2015

I created this power brick cradle for the PA-2...

http://www.pdc.ca/rr/catalog/2410/


Cheers!
- Bill

2410-3_lg.jpg  2410-4_lg.jpg 2410_dwg.png
« Last Edit: October 09, 2015, 02:12:21 PM by Archive »

Archive

  • Conductor
  • ****
  • Posts: 233
Re: A cradle for your Railpro Power Supply Brick
« Reply #1 on: October 09, 2015, 02:12:35 PM »

Originally posted by kpack05 on the RailPro Users Yahoo! Group on Jul 14, 2015

Now that is slick Bill.  What a great solution.  Clean, neat, and looks robust.  I don't have the PWR-56 (yet) so this isn't something I can use just yet.  I have the older PWR-75, which doesn't use a power brick, but will be adding the 56's when I get to the point of building a layout.

You're making me jealous with that laser.  It seems that any problem you have can be fixed by it.

-Kevin


Archive

  • Conductor
  • ****
  • Posts: 233
Re: A cradle for your Railpro Power Supply Brick
« Reply #2 on: October 09, 2015, 02:12:48 PM »
Originally posted by jacob.damron on the RailPro Users Yahoo! Group on Jul 14, 2015

Bill:

That is really, really cool.  I have a project that I'll need to contact you about.

Thanks for sharing.

Jacob

Prostreetamx

  • Fireman
  • **
  • Posts: 27
  • Modern BNSF
Re: A cradle for your Railpro Power Supply Brick
« Reply #3 on: December 02, 2015, 11:26:14 AM »
Nice idea and you can find lots of similar items to hold odd shapes on Shapeways web sight that are 3D printed. That being said, in the Trade Show business we run into lots of these power supplies and power strips we need to mount and we use Velcro. I also have the PWR-75 and mine will sit on a shelf. Not trying to stir anything up, just making an observation. Now a laser cut box for waybills or a HC-2 fascia mount would be pretty cool.
Modeling modern BNSF on 20x20 freelanced double deck layout under construction.

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1324
    • Precision Design Co.
Re: A cradle for your Railpro Power Supply Brick
« Reply #4 on: December 02, 2015, 11:44:13 AM »
Waybill boxes coming early next week.
HC2 holder? great idea. I'll get on that!
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.


nodcc4me

  • Conductor
  • ****
  • Posts: 686
  • RailPro Fan
Re: A cradle for your Railpro Power Supply Brick
« Reply #5 on: December 02, 2015, 12:45:03 PM »
I made a fascia mount HC-2 holder out of wood, lined with material inside. What we really need is a belt clip holder. When you put it in your pocket the button inevitably gets pushed over and over again, keeping the screen backlight on.
Al

Run your train, not your brain. Get RailPro. It's a no-brainer.

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1324
    • Precision Design Co.
Re: A cradle for your Railpro Power Supply Brick
« Reply #6 on: December 02, 2015, 01:08:03 PM »
I think a simple 'operators apron' is better suited than a pocket or belt clip. You can hold other stuff this way too.

- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.