Author Topic: Wire  (Read 3868 times)

Tommy Mac

  • Fireman
  • **
  • Posts: 5
Wire
« on: May 08, 2017, 07:50:15 PM »
Need some help? I ready to install the system an having some issue with type of 16ga. wire to get. I assume ( there's a loaded word) not all wire is equal?

Thanks for your help!

Alan

  • Conductor
  • ****
  • Posts: 1073
    • LK&O Railroad
Re: Wire
« Reply #1 on: May 09, 2017, 05:51:45 AM »
You are correct not all wire is equal however for wiring a RP layout you can safely assume all wire is equal. Pretty much any insulated 16 ga wire will work.
Alan

LK&O Railroad website

When I was a kid... no wait, I still do that. HO, 28x32, double deck, 1969, RailPro

Tommy Mac

  • Fireman
  • **
  • Posts: 5
Re: Wire
« Reply #2 on: May 10, 2017, 09:07:36 PM »
Thanks for the reply !!

Carter

  • Fireman
  • **
  • Posts: 47
Re: Wire
« Reply #3 on: November 10, 2017, 10:30:15 AM »
Hi, Don't use solid conductor wires, 1st. hard to work with, 2nd vibration can cause a breakage, 3rd, may have trouble with solid wire locking into the Railpro Power Unit connections. Solid wire does not easily compress so you may over tighten the connection and cause damage to the termination point.

My 2 cents.

carrson

  • Fireman
  • **
  • Posts: 21
Re: Wire
« Reply #4 on: November 10, 2017, 10:43:58 AM »
yes.. agree completely with Carter's reply...I used 14 ga. for my buss and 18 for the drops... I tinned the ends of the bus
 and filed them smooth to fit nicely into the power supply terminals...maybe overkill with the gauge of wire but that is what I used...

Larry

MtRR75

  • Conductor
  • ****
  • Posts: 105
Re: Wire
« Reply #5 on: November 10, 2017, 08:21:04 PM »
 I also used 14 gauge stranded wire for my bus.  I only needed 16 gauge, but Home Depot had 14 gauge stranded cheaper than any source of 16 gauge that I could find.  And they had it in 4-5 colors.

TwinStar

  • Conductor
  • ****
  • Posts: 512
  • Modeling a 1961 Rock Island Twin Star Rocket
Re: Wire
« Reply #6 on: November 10, 2017, 09:43:25 PM »
I use 14 ga stranded for my bus and 24 ga solid for my feeders. Nine years of Free-mo without a single broken wire.
Jacob Damron
Modeling late 1950's Dallas Union Terminal in Free-mo+ modules

Texas Railway Modeling and Historical Society trmhs.org
trmhs.org

Alan

  • Conductor
  • ****
  • Posts: 1073
    • LK&O Railroad
Re: Wire
« Reply #7 on: November 11, 2017, 12:53:23 PM »
12 AWG solid for my buss, 24 AWG stranded for my feeders. Working great.
Alan

LK&O Railroad website

When I was a kid... no wait, I still do that. HO, 28x32, double deck, 1969, RailPro