« previous next »
Pages: [1]

Author Topic: Motor Current problem  (Read 7019 times)

Coal Valley BNSF

  • Fireman
  • **
  • Posts: 13
Motor Current problem
« on: March 13, 2021, 02:56:54 PM »
Why do I have motor current showing 2 to 4% on my mid train helpers when the lead engines have 0% motor current.
« Last Edit: March 13, 2021, 03:00:50 PM by Coal Valley BNSF »
Logged

nodcc4me

  • Conductor
  • ****
  • Posts: 689
  • RailPro Fan
Re: Current problem
« Reply #1 on: March 13, 2021, 03:03:04 PM »
That's not a significant difference. Are you seeing problems with the helpers? It may have to do with the maximum current settings. If they are all getting along well I wouldn't worry about it.
Logged
Al

Run your train, not your brain. Get RailPro. It's a no-brainer.

Coal Valley BNSF

  • Fireman
  • **
  • Posts: 13
Re: Motor Current problem
« Reply #2 on: March 13, 2021, 03:06:11 PM »
The mid train helpers are still pushing while the lead engines are not.
Logged

nodcc4me

  • Conductor
  • ****
  • Posts: 689
  • RailPro Fan
Re: Motor Current problem
« Reply #3 on: March 13, 2021, 03:21:14 PM »
Check the maximum current settings. Similar engines should have settings that are very close to each other. If necessary, you can manually change the setting in an errant locomotive, but I haven’t had to manually change those settings more than a couple times.
Logged
Al

Run your train, not your brain. Get RailPro. It's a no-brainer.
Pages: [1]
« previous next »