Author Topic: How to turn knob on PC Simulator  (Read 29978 times)

Hammer

  • Fireman
  • **
  • Posts: 11
How to turn knob on PC Simulator
« on: March 26, 2023, 11:52:35 AM »
On the simulator on my PC I cannot figure how to turn the knob for adjusting volume.  Is there some magic way to turn the knob to lower volume of sound for example?

Also my physical keyboard doesn't type when there is a place to type, do we have to use the keyboard on the screen?

Hammer

  • Fireman
  • **
  • Posts: 11
Re: How to turn knob on PC Simulator
« Reply #1 on: March 26, 2023, 11:54:34 AM »
I figured it out on accident, it's the mouse scroll wheel!!!

nodcc4me

  • Conductor
  • ****
  • Posts: 689
  • RailPro Fan
Re: How to turn knob on PC Simulator
« Reply #2 on: March 26, 2023, 12:36:30 PM »
Yes, you have to use the HC keypad, clicking on one letter at a time. Fortunately, you don't have to do it often.
Al

Run your train, not your brain. Get RailPro. It's a no-brainer.

RickC

  • Brakeman
  • *
  • Posts: 1
Re: How to turn knob on PC Simulator
« Reply #3 on: March 28, 2023, 10:35:16 AM »
I’m using a laptop with no mouse scroll and can’t get the knob to turn, any ideas?
Thanks,
Rick

nodcc4me

  • Conductor
  • ****
  • Posts: 689
  • RailPro Fan
Re: How to turn knob on PC Simulator
« Reply #4 on: March 28, 2023, 11:04:20 AM »
I believe you will need a mouse, if you have a USB port to plug it into.
Al

Run your train, not your brain. Get RailPro. It's a no-brainer.

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1345
    • Precision Design Co.
Re: How to turn knob on PC Simulator
« Reply #5 on: March 28, 2023, 12:45:26 PM »
The answer is:

Place two fingers on the touchpad and move them up and down to scroll vertically, or left and right to scroll horizontally.
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.