AM-1B update

[Jim Agnew]

After updating to Rev 1.20, I’m getting a “Loop Time Warning” and can no longer activate switches. Help!

[G8B4Life]

Nobodies reported that warning here before, but not many here use the AM-1b in either of it's varieties as far as I know.

All I can suggest is to ask if you updated your AM-1b with the correct program; there is the normal program and the accessory program; you need the normal program to control points (that's switches to most of you all reading this).

If you did update with the correct program then try re-saving any settings in the AM-1b and see if it will do the trick. If all that fails then I guess a call to Ring Engineering will be in order.

- Tim

[Jim Agnew]

Yes, I initially loaded the wrong file. Have recovered from that error, but now  I’m missing the accessory picture and can’t find the one I need.

[G8B4Life]

Which picture is that? can you describe what it looks like?

- Tim

[Jim Agnew]

I’m getting a yellow block on the Home Screen of the HC.

[Jim Agnew]

Making progress, found the picture of the AM-1, but now when I go to copy it, it says the file is in use. Time for a call to Ring.

[Jim Agnew]

Problem solved. Removed product and re found the AM-1b. Only picture for the AM-1b is the graphic display of the 4 switches.