« previous next »
Pages: [1]

Author Topic: Downloading files to remote  (Read 1351 times)

Davidbross

  • Engineer
  • ***
  • Posts: 60
Downloading files to remote
« on: March 23, 2021, 12:34:24 PM »
I plugged in the cl-1. I fired up railpro assist. But it says not connected to handheld.  I had the remote on and opened the appropriate screen to start a download.  Any thoughts?
Logged

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1326
    • Precision Design Co.
Re: Downloading files to remote
« Reply #1 on: March 23, 2021, 12:40:48 PM »
The CI-1 is not used to load to the HC. It is used in conjunction with the HC-Simulator Software to interact with LM's and other modules.

To load files to an HC, you must connect the HC by USB.
Logged
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.

Davidbross

  • Engineer
  • ***
  • Posts: 60
Re: Downloading files to remote
« Reply #2 on: March 23, 2021, 02:38:37 PM »
Thanks.  I thought people were using that to bypass the direct plugin as they were having trouble with the remote not acting correctly.
Logged

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1326
    • Precision Design Co.
Re: Downloading files to remote
« Reply #3 on: March 23, 2021, 05:12:35 PM »
You can manage your LM's from the HC-Simulator using the CI-1, which saves you from battery issues on the HC.

Then you can control the LM's from the HC.

I personally use a combination of the two, since you can update more than one LM at a time by using the HC-Sim/CI-1 for one and the HC for another.
Logged
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.

Pages: [1]
« previous next »