Author Topic: Question about Coupler Clank Sound  (Read 1436 times)

MtRR75

  • Conductor
  • ****
  • Posts: 105
Question about Coupler Clank Sound
« on: October 19, 2019, 10:36:00 AM »
While programing my new LM-3S, I just discovered that there are two button icons for the Coupler Clank sound -- a Couple icon and an Uncouple icon.  But there is only one Coupler Clank sound.  Did I miss something?

KPack

  • Conductor
  • ****
  • Posts: 770
Re: Question about Coupler Clank Sound
« Reply #1 on: October 19, 2019, 02:26:20 PM »
There is no uncouple sound supplied by Ring Engineering.  I pulled mine from recordings that were made for train simulator games.  There are a number of mods out there for those games that replace the sound.  If you download some of those files you can find a few things in there of use.  New couple and uncouple sounds are the ones I used.  I believe that if it's for personal use there is no issue, but you cannot share them.  Someone may know more than me on this though.

-Kevin

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1324
    • Precision Design Co.
Re: Question about Coupler Clank Sound
« Reply #2 on: October 19, 2019, 06:52:36 PM »
There are a number of clanks sounds I recorded, and already edited for use on RailPro here:
https://rpug.pdc.ca/index.php/topic,139.0.html

Among the other sounds, on the RPUG are also some stretch sounds.
https://rpug.pdc.ca/index.php/board,4.0.html
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.


William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1324
    • Precision Design Co.
Re: Question about Coupler Clank Sound
« Reply #3 on: October 19, 2019, 06:54:51 PM »
AND I see as of today on Rings website:

October 2019
New Sounds

Diesel Other - Uncouple Lever
The sound the lever makes when pulled to release a coupler knuckle.

Diesel Other - Uncouple
The sound of the knuckles coming apart and the sound of the air line coming apart.
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.


MtRR75

  • Conductor
  • ****
  • Posts: 105
Re: Question about Coupler Clank Sound
« Reply #4 on: October 20, 2019, 09:24:23 AM »
Thanks for the suggestions.

I will look into them when I get some time.