RailPro > RailPro Specific Help & Discussion
Wiring troubles. Help appreciated.
Davidbross:
If you read the original post you will see it’s an led. You will also see I tested the led again after trying to get it to light with the board. The led still works so not blown. Again the problem is no power from the board to the lighting wires. I’ve tried every wire.
William Brillinger:
Can you give us the full detail on how you configured the button on the HC?
What wire, what effect, what button image... everything?
faithie999:
sorry for missing those details.
are the other 5 outputs also dead?
in any case, I'm sure Ring will repair or replace the module. I had a very good experience with Ring with a similar issue (not with the -G model, though).
Davidbross:
Let's hope it's not the module. I've spent many hours working on loading sounds etc.
nodcc4me:
Check the program revision of the module. Should be 2.30. Make sure you are using headlight ON-Off Rev 2.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version