Author Topic: dead rail battery  (Read 9135 times)

amtrack5899

  • Brakeman
  • *
  • Posts: 2
dead rail battery
« on: August 05, 2022, 11:46:35 AM »
I am new to Rail Pro.  I plan on running dead rail battery power .  I have a 3350 mah battery that I plan on installing in a USA train switcher engine.  This will have a on/off/on switch w battery plug & charging jack with 12” leads. I would also like to use a battery car with a 4 amp hour battery for longer run time. Can I use a second  on/off/on switch to bypass the battery in the engine and just use the battery car when needed?
Thank you
Rich R

gregeusa

  • Engineer
  • ***
  • Posts: 93
    • Greg's web site
Re: dead rail battery
« Reply #1 on: August 05, 2022, 06:01:00 PM »
of course, the RailPro unit does not care, power is power.
Lots of tips and techniques on my site: www.elmassian.com contact me greg@elmassian.com

ron045

  • Engineer
  • ***
  • Posts: 70
Re: dead rail battery
« Reply #2 on: August 06, 2022, 07:01:54 AM »
That seems like a complicated mission.  How long do you run trains that you need that much battery?  I run a 14.8V LiIon 3.5ah in O scale and can run continuous for about 3 hours.

If my battery in the engine is dead, I park/charge the engine and run a different engine.

gregeusa

  • Engineer
  • ***
  • Posts: 93
    • Greg's web site
Re: dead rail battery
« Reply #3 on: August 06, 2022, 11:54:22 AM »
USA Trains is G scale, and USAT is famous for having high stall current motors.

He's thinking in a good way.

Greg
Lots of tips and techniques on my site: www.elmassian.com contact me greg@elmassian.com